Realism down to the finest detail … thanks to Dolby Atmos®: in conjunction with Dolby
Atmos®-enabled AV receivers or processors, the A4 recreates a three-dimensional impression of sound that catapults you into the middle of the action. Thanks to the reflection principle employed by the A4, installation couldn‘t be easier – simply place it
on top of your main loudspeakers

A4 Specifications

Speaker type: Sealed
Frequency response: 180 to 20,000 Hz
Nominal impedance: 6 Ω
Sensitivity: 85 dB at 2.83 v/1m
Crossover frequency: 5,000 Hz
Maximum power input: 80 Watts
Tweeter: .5-inch polymer dome
Woofer: 4-inch woven aramid-fiber cone with oversized magnet
Cabinet: CARB2 rated MDF
Cabinet finish: Black brushed vinyl
Binding posts: 5-way metal
Width: 7.87 in / 200 mm
Height: 4.83 in / 123 mm
Depth: 8.75 in / 222 mm
Net weight (each): TBD
Gross weight (packaged pair): TBD
*A Dolby Atmos® AV receiver or processor is required to used these add-on speaker modules. Please visit Dolby.com to see if this add-on module is correct for your room